wire / wire-format / edid

EDID (Extended Display Identification Data)

EDID is a 128-byte (or 256-byte for EDID 1.4) data structure that describes a display's capabilities. Transmitted over DDC (Display Data Channel) on VGA/HDMI/DP. Contains: manufacturer ID (2 bytes, PNP ID), product code (2 bytes), serial number (4 bytes), manufacture week/year (2 bytes), EDID version/revision (2 bytes), video input params (1 byte), screen size (2 bytes), gamma (1 byte), features (1 byte), color characteristics (10 bytes), established timings (3 bytes), standard timings (16 bytes), detailed timings (4 x 18 bytes = 72 bytes), extension flag (1 byte), checksum (1 byte).

wire-format kind wire-format status standard verification verified tier B wire-format@1

aka: EDID (Extended Display Identification Data)

wire format

spec: VESA EDID

EDID is a 128-byte (or 256-byte for EDID 1.4) data structure that describes a display's capabilities. Transmitted over DDC (Display Data Channel) on VGA/HDMI/DP. Contains: manufacturer ID (2 bytes, PNP ID), product code (2 bytes), serial number (4 bytes), manufacture week/year (2 bytes), EDID version/revision (2 bytes), video input params (1 byte), screen size (2 bytes), gamma (1 byte), features (1 byte), color characteristics (10 bytes), established timings (3 bytes), standard timings (16 bytes), detailed timings (4 x 18 bytes = 72 bytes), extension flag (1 byte), checksum (1 byte).

fieldsizemeaning
Header8 bytes0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x00 (fixed pattern).
Manufacturer ID2 bytesPNP ID (3 letters, 5 bits each, big-endian). E.g., 'DEL' = Dell.
Product code2 bytesManufacturer-specific product code.
Serial number4 bytesManufacturer-specific serial number.
Manufacture date2 bytesWeek (1 byte) + year (1 byte, years since 1990).
EDID version/revision2 bytesVersion (1 byte) + revision (1 byte). E.g., 1.3 or 1.4.
Video input1 byteDigital/analog, bit depth, interface type.
Screen size2 bytesWidth (cm) + height (cm). 0 if not specified.
Gamma1 byteGamma value (gamma = (value + 100) / 100). 0xFF = use sRGB.
Features1 byteDPMS (standby/suspend/active off), RGB color, display type, sRGB, preferred timing.
Color characteristics10 bytesChromaticity coordinates for red, green, blue, white.
Established timings3 bytesBitmap of supported standard timings (640x480@60, 800x600@60, 1024x768@60, etc.).
Standard timings16 bytes (8 x 2)8 standard timing descriptors (resolution + refresh rate).
Detailed timings72 bytes (4 x 18)4 detailed timing descriptors (pixel clock, H/V active/blanking, sync offsets, etc.).
Extension flag1 byteNumber of extension blocks (each 128 bytes). 0x00 = no extensions.
Checksum1 byteSum of all 128 bytes = 0 mod 256.

example:

00 ff ff ff ff ff ff 00

EDID header: 0x00 0xFF x6 0x00


provenance

agent: curl -H 'accept: application/json' wire.phall.io/wire-format/edid or /wire-format/edid.json